| 垫片进入刀片要三分之二，这样我们才能准备的测出间隙 🇨🇳 | 🇬🇧 The gasket gets into the blade two-thirds so we can prepare the measurement gap | ⏯ |
| 垫片已经切断的情况下，有可能上刀与下刀啃刀了 🇨🇳 | 🇬🇧 The gasket has been cut off in case it is possible to put on the knife and gnaw the knife | ⏯ |
| 装三把刀在上面测间隙 🇨🇳 | 🇬🇧 Put three knives on top of the gap | ⏯ |
| 肯刀就需要垫垫片 🇨🇳 | 🇬🇧 Ken knife needs gaskets | ⏯ |
| 刀片 🇨🇳 | 🇬🇧 blade | ⏯ |
| 刀片 🇨🇳 | 🇹🇭 ใบ มีด | ⏯ |
| 刀卡 🇨🇳 | 🇬🇧 Knife card | ⏯ |
| 测间隙 🇨🇳 | 🇬🇧 Gap measurement | ⏯ |
| 上刀和下刀螺丝是一样的 🇨🇳 | 🇬🇧 The upper and lower screws are the same | ⏯ |
| 刀片隔片 🇨🇳 | 🇬🇧 Blade divider | ⏯ |
| 车刀片 🇨🇳 | 🇬🇧 Car Blade | ⏯ |
| 不锈钢刀片 🇨🇳 | 🇬🇧 Stainless steel blade | ⏯ |
| 与刀听不懂吗 🇨🇳 | 🇬🇧 Dont you understand the knife | ⏯ |
| 我需要手术刀的刀片 🇨🇳 | 🇬🇧 I need a scalpel blade | ⏯ |
| 我见拿刀片 🇨🇳 | 🇬🇧 Ill see the blade | ⏯ |
| 我会用刀 🇨🇳 | 🇬🇧 I can use a knife | ⏯ |
| 刀片压条 🇨🇳 | 🇬🇧 Blade press | ⏯ |
| 刀片压板 🇨🇳 | 🇬🇧 Blade press | ⏯ |
| 刀片铆钉 🇨🇳 | 🇬🇧 Blade Rivets | ⏯ |
| 嘴巴张大，头低一点 🇨🇳 | 🇬🇧 The mouth is wide and the head is lower | ⏯ |
| 垫片进入刀片要三分之二，这样我们才能准备的测出间隙 🇨🇳 | 🇬🇧 The gasket gets into the blade two-thirds so we can prepare the measurement gap | ⏯ |
| 超出上下限 🇨🇳 | 🇬🇧 Exceeding the upper and lower limits | ⏯ |
| 上刀和下刀螺丝是一样的 🇨🇳 | 🇬🇧 The upper and lower screws are the same | ⏯ |
| 上下公差如何 🇨🇳 | 🇬🇧 How about the upper and lower tolerances | ⏯ |
| 上下层都是可用的，对吗 🇨🇳 | 🇬🇧 The upper and lower levels are available, right | ⏯ |
| 上下的牙齿都需要印模，各印两次，等材料干了我们就拿出来 🇨🇳 | 🇬🇧 The upper and lower teeth need to be imprinted, printed twice, and so the material dry we take out | ⏯ |
| 垫片已经切断的情况下，有可能上刀与下刀啃刀了 🇨🇳 | 🇬🇧 The gasket has been cut off in case it is possible to put on the knife and gnaw the knife | ⏯ |
| The door is stuck, or jammed. Mean the same thing 🇨🇳 | 🇬🇧 The door is stuck, or jammed. Mean the same thing | ⏯ |
| so that the children can understand each other 🇨🇳 | 🇬🇧 So that the children can understand each each | ⏯ |
| 先修磨一次再测一下间隙 🇨🇳 | 🇬🇧 Grind it once before you measure the gap | ⏯ |
| 差距非常大 🇨🇳 | 🇬🇧 The gap is huge | ⏯ |
| 问题是气阀也有一点同样的间隙但不能调整翻工只能报废 🇨🇳 | 🇬🇧 The problem is that the valve also has the same gap but can not adjust the flip only scrap | ⏯ |
| 拿到你买的机器那里去刀模割一下 🇨🇳 | 🇬🇧 Get the machine you bought and cut the knife | ⏯ |
| 安装防护罩和底部固定垫片 🇨🇳 | 🇬🇧 Install the shield and the bottom fixing gasket | ⏯ |
| 这道题如此简单，我们能够回答他 🇨🇳 | 🇬🇧 The question is so simple that we can answer him | ⏯ |
| 座位宽么 🇨🇳 | 🇬🇧 Is the seat wide | ⏯ |
| 我们早起是为了能准时到达火车站 🇨🇳 | 🇬🇧 We get up early so that we can get to the railway station on time | ⏯ |
| 如果老师不是严厉的，我们将不 🇨🇳 | 🇬🇧 If the teacher is not strict, we will not | ⏯ |